SenTech STC-A33A Manual do Utilizador descarregar pdf (Página 24)

STC-A33A

V. Communication Protocol Specifications

This camera has a communication function that enables external devices, such as the PC, to control the camera functions and

parameters. Use the “CLCtrl” communication software (version 9.0 or later) to communicate, or follow the communication protocol

described below to communicate with the camera.

Note: A communication problem may occur under the following conditions:

 When the external sync frequency is out of the specification (more than 1% off from the specified normal frequency)

 When external sync is unstable.

 Approximately for one second after changing the sync mode.

 Approximately for one second after switching the frame rate.

A. Communication Method

UART (RS232C)

B. Communication Settings

Settings

Baud Rate

9,600 bps / 38,400 bps

Data Bit

8 bit

Parity

None

Stop Bit

1 bit

Flow Control

None

Application Manual 20 of 60 Rev1.0

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 66 67

Sem comentários

SenTech STC-A33A Manual do Utilizador Página 24